Well drilling rig operated insurance rules 1. No matter what the circumstances Tai'an rigs offer, when it was working on the mast section Tai'an rigs brands are not allowed to stay under the mast other staff. 2. In the event vile weather (rain, snow, ice, or more than five years of night wind), not allowed to work on the mast, hydraulic filters. At the same time, do not permit the use of artificial lighting in the mast. 3. Do not use wire rope split shares. 4. landing drill, severely curb touch the rope. 5. In addition to elevating drilling rig, drill pipe endures, open wellhead prohibited. 6. In order to avoid drilling or pumping tube wells outside swinging from the well when pulled, the hook must be applied by 15 ~ 20mm diameter steel bars made of hook. 7. cleaned pumping tube, you should use a solid robust rope looped, set in the lower end of the pump cylinder, which is spilled, CSM. 8. Use the pulley casing promotion or landing when and machinery at the salvage work, all workers should be separated from the drilling. 9. When the casing is pulled out with a crane, in order to prevent the sleeve off, the necessary fixed to each other in the way. 10. In the case of the next stop light (night time), well drilling rig work should be stopped. This time when the well is still drilling, the drill should be vigilant taken out from the well. Here Machinery Co., Ltd. Shandong Long talk down to you, Shandong rig accessories - Rotary drilling rig drilling operation should pay attention to what provisions: one rig parts Shandong, before you start, operator must complete the appropriate content bumban patients insured?. 2. When you start, you should let the engine idle for two minutes, five minutes in winter, check the instrument for each instrument, the indicator is normal, without exception, before normal drilling. 3 rigs operating in Tai'an, prohibit blind pressure, improve pressure should be controlled at about 300 Pa, rotating pressure control in about 100 Pa. 4, always pay attention to the rope on the main winch drum is arranged in order, if confusion, should be re-wrap. 5, always pay attention to the work of the union, such as the discovery rope torsion phenomenon, check the union, if necessary, should be replaced. 6, always pay attention to the work of the drill, if not justify, or when not put phenomena or other unusual circumstances, should be immediately reported on duty leadership, should not blind treatment. 7, work, any red light (when the indicator light is not correct) should stop to check, identify the reasons repaired before it can continue to work. 8, in the use of soil dumped motor control should hold the power button on the handle of a good quality Tai'an rig until the system pressure rose to 15 Pa, and then slowly the operating handle to the maximum position; when you stop, you should slowly return the handle, then release the button. Do not yet back in the position of the handle, the sudden release electrical control button. These are the provisions stipulated drilling rig parts, if you do not know much about the rig accessories to use, Lung Machinery Co., Ltd. Shandong consult relevant content. Tai'an rig Brand | Tai'an rig | Long industry machinery provided by Shandong Machinery Co., Ltd. Dragon. Industry Machinery Co., Ltd. Shandong Long (www.longyejixie.com) strong, credible, in Tai'an, Shandong Engineering Machinery Parts industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead industry machinery and you work long into the brilliant, for a better future!