How rotary drilling rig rotary drilling rig rope to choose before selecting the rope, we must understand the use of rotary drilling rig rope types and characteristics. Such models can not be determined for the use of the type of wire rope, ensure construction when it is safe. Then the rotary drilling rig rope to choose how to proceed? One end of the wire rope used in rotary drilling rig with wedge fixed to the winch drum and the other end is fixed to the upper end of the drill pipe mention introducer. In the power drill head driven rotary drilling construction process, include references to the lower end of the rotation together with the drill pipe, and the upper end is not rotating, rotating drill pipe stress minimized. General purpose rope will rotate along the cord when subjected to torsional loads, so the rope itself becomes loose. If you select the anti-rotation non-rotating wire rope, wire rope for improving the life, safety of staff and equipment to increase productivity will receive a significant effect. Due to the current domestic and foreign rotary drilling rigs are not installed movable pulley, so the rope line pull bigger. This should be equipped with good flexibility, good abrasion resistance, anti-rotation and anti-extrusion properties of a good rope. Especially for multi-layer winding front winch drum, twist recommend using the same rope, in order to avoid the femoral produce prints. Small auger save fuel a coup small auger when in use, when driving on uneven pavement, often beating its cause deformation increases suspension and tires, resulting in significant increase in rolling resistance, and the good road compared to the situation on driving, fuel consumption increased by 30% -50% drilling rigs, skilled small rotary drilling machine operator to have a certain way of fuel savings. First, minimize the auger with the resistance and acceleration resistance, etc., large resistance is more fuel. If the vehicle speed in the construction of 400km / h or less, the air resistance is negligible. Construction should pay attention to road conditions change Tai'an rig, choosing the right tire pressure support rig, in order to reduce fuel consumption. Each auger transmission gear ratio of the transmission a great impact on fuel consumption, the construction should try to use small, high-speed gear ratio, which can save fuel. Reduce intake system resistance. Filters should be promptly cleaning and maintenance, to ensure that there is enough air into the cylinder in a timely manner. Holding auger good condition. For cylinder pressure of the engine, diesel engine generally should not be less than 20% of the original machine standard pressure of gasoline is not less than 30%. School good engine fuel supply advance angle. Fuel supply advance angle is too large or too hours, it can cause the engine to increase fuel consumption, therefore, to make good use of the engine performance, fuel supply advance angle must be calibrated. Reduce the unit load fuel consumption. In the auger conditions permit conditions, load auger is raised to the rated load, it can increase productivity, but also lead to a significant decrease in fuel consumption per unit weight. Slope rigs | drilling rig | Long industry machinery supplied by Shandong Machinery Co., Ltd. Dragon. Machinery Co., Ltd. Shandong Long (www.longyejixie.com) strong, credible, in Tai'an, Shandong Engineering Machinery Parts industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead industry machinery and you work long into the brilliant, for a better future!