Well drilling rigs rotating system What are the technical requirements for water well drilling rig rotary system is an important part of a small rig, its main function is the rotation of the drill string, drill, broken rock, forming a wellbore. Including turntable, faucets and top drive drilling system in three parts, drilling rig prices, they are well drilling rig floor rotating equipment. Here, we will introduce the rotation system: a small well drilling process requirements of the turntable. 1. a large enough torque and a certain speed, driven by a rotating drill string breaking rock drill, drilling rig Which is good, and to meet the salvage, upside down, making the deduction or milling and other special operational requirements. 2. With a shock, impact and resistance to corrosion. 3. Good sealing, lubricating properties to prevent outside mud, dirt into the internal damage to the main and auxiliary turntable bearings. Second, the turntable structure: horizontal shaft assembly consists of the power input connection flange or universal shaft sprocket drive, the horizontal axis, bevel pinion bearing sleeve and a small oil sump in the base composition. Note the use of rotary drilling rig 1, after starting the engine, should low speed for 3-5 minutes and turn in a no-load power head, drill, in order to facilitate the hydraulic system is working properly. 2, the rig during operation, the operator should regularly observe a variety of instrument instruction is normal, if unusual circumstances should be stopped and checked. 3, the operation should pay special attention to the operation control lever should be in place in order to avoid pressure shocks to the system. 4, in the course of the tightening pressure should be checked vibration fittings and pump tightening bolts, drilling rig manufacturers to ensure that no oil spills, leakage phenomenon. 5, the rig must be commanded by a person when walking, with particular attention to the dangerous location power lines, puddles, etc. 6, within the scope of the rig swivel strictly prohibited. 7, the rig after the transfer process, must stretch crawler flatbed immediately after the next car. 8, check the hydraulic oil, hydraulic oil cooling must wait before proceeding. 9, when the drill pipe welding parts, must turn off the power switch. 10, regularly check the swivel joint drilling rig model, rig, dragon industry machinery supplied by Shandong Machinery Co., Ltd. Dragon. Drilling rig model, rig, Shandong Dragon Dragon Industry Machinery Industry Machinery Co., Ltd. (www.longyejixie.com) this year introduced a new upgrade, the above picture is for reference only, please call the telephone or pictures on this page, for the latest Information, Contact: Guo Lei.